Prusa MK3 Lazy Susan Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When printing soft or flexible filaments, even the slightest resistance in the spool holder can cause unpredictable…
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 52
- Makes
- 1
- Views
- 474
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
When printing soft or flexible filaments, even the slightest resistance in the spool holder can cause unpredictable tension/stretching in the filament feed, leading to irregular prints. This spool holder for the Prusa MK3 frame uses a single 608 bearing to minimize feed resistance.
Drop the bearing into the hat & push down firmly to seat. Drop an M8 nut into the bottom of the axis & get it close to seated, then insert an M8 screw thru the top of the bearing/hat assembly & screw it into the nut until firm. Give it a test spin. Giggle and spin it again. Hook it onto the frame, hook the guide on next to it, then drop a roll of filament onto it.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: Matterhackers PLA White
Notes:
Supports are only necessary for the hat, which I would recommend printing flat. Print the other 2 on their flat sides, so the print is drawing the profile of the "hook" on each layer.
Category: 3D Printer Accessories