Universal Motor to DYNAMO
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.81 – €9.55 net (excluding VAT)
For file: AA8_carcasa.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.68 excluding VAT (range midpoint).
- Weight reported by the author
- 102 g
- Print time reported by the author
- 9 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A put it in the place of the iron case, there is space for 4 microwave magnets
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 43
- Makes
- 0
- Views
- 935
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model is a modification you can do to convert an universal motor ( in my case from a washing machine) to convert it to a fully DC motor with fixed magnets. This also converts it into a dynamo, wich can convert circular motion into electricity, (making tests i was able to get 10 volts ataching the bicicle wheel to the motor)
CONSTRUCTION:
Obiously, you will need an universal motor, i don't know the specific name but they can be found on wahing machines. And also a microwave, to extract the magnets
- Dissasemble the microwave until you only have the magnetron
2.CAREFULLY dissasemble the magnetron to extract the two magnets (IMPORTANT NOTE: the magnetron has dangerous components, if you wanna do this project you have to do research of how to dissasembly safely a magnetron)
3. if you want you can repeat the steps 1 and 2 to get a total of 4 magnets
4. Print the case and put the magnets on it
5. Dissasemble the universal motor and change the iron central part with the 3d printed case with the magnets.
6. Connect the cables and have fun!