1 / 2
Creality CR-10 - Voron Stealthburner Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Breathe new life into your old CR-10 platform with this "simple" mod. Put a Stealthburner on your CR-10!
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 129
- Makes
- 1
- Views
- 2,090
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
These files will allow for the addition of a Voron Stealthburner to the CR-10 Platform. This is not a conversion to a Switchwire or anything of that ilk. It's simply a means to adapt the current MGN12 mounted version of the Stealthburner to the CR-10 or equivalent printer.
Parts Needed:
- MGN12 Linear Rail of suitable length
- Replacement 2GT X-Axis Belt (2mm pitch, 6mm width)
- 3D Printed Stealthburner Parts From Voron GITHUB. *
* Exept for the X-Carriage Parts
Build Notes:
- All files oriented for printing without supports. StepperEndstopRetainer has a breakaway disposable support.
- You will need a new belt as the stock belt is a bit short.
- Remove and reattach the X-Endstop as depicted in the photo.
- IMPORTANT — The Omron TL-Q5MC1 probe used in the Stealthburner is not sensitive enough to work through the glass build plate supplied with the CR-10. You must use a Spring Steel removable build plate with this probe.