1 / 2
Creality CR-10 - Voron Stealthburner Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Breathe new life into your old CR-10 platform with this "simple" mod. Put a Stealthburner on your CR-10!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 2096
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (27)Powiązane
These files will allow for the addition of a Voron Stealthburner to the CR-10 Platform. This is not a conversion to a Switchwire or anything of that ilk. It's simply a means to adapt the current MGN12 mounted version of the Stealthburner to the CR-10 or equivalent printer.
Parts Needed:
- MGN12 Linear Rail of suitable length
- Replacement 2GT X-Axis Belt (2mm pitch, 6mm width)
- 3D Printed Stealthburner Parts From Voron GITHUB. *
* Exept for the X-Carriage Parts
Build Notes:
- All files oriented for printing without supports. StepperEndstopRetainer has a breakaway disposable support.
- You will need a new belt as the stock belt is a bit short.
- Remove and reattach the X-Endstop as depicted in the photo.
- IMPORTANT — The Omron TL-Q5MC1 probe used in the Stealthburner is not sensitive enough to work through the glass build plate supplied with the CR-10. You must use a Spring Steel removable build plate with this probe.