1 / 2
WPL B16 Rear Bumper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Bumper does not need supports.
Frame needs support on the ends only.
You can glue the parts together or use small tie wraps, in the frame part there are holes for this and in the bumper part you can use the wire holes. This is shown in the photo.
Holes are for 3mm LED's, parts made for clean cable routing.