47 models
Thats newest F1 car from RedBull You'll propably need to cut this model in few parts to print I will be releasing a 1/7th scale RB16B running model in the near future, so keep an eye on my profile!
I came across this on Tinkercad, but it contained quite a few errors in the model, misaligned bits etc. So I cleaned it up and made it more printable and now it lays flat on the print bed, the slats are properly meshed with the crate body…
Provided STL is for monitor width 9,6 mm and 55 deg angle. The model is parametric - you can define your own angle and monitor width.
Simple supports for the portable screen Asus ZenScreen MB166. It is meant to be used with the screen horizontaly, and it has the space for inserting the usb-c cable. This model has a depth of 12mm so it might fit other similar models, not…
Couldn't find a simple mount/housing for ELPs 16 Megapixel USB camera module, which can be mounted behind the bed, facing the front of my Voron 2.4. Made it especially for ELP-USB16MP01 “H110”(undistorted 110 degree lens, FOV is about 107…
These are switch caps for Cherry MX, mid-height MX style switches and low profile Cherry + Kailh choc v2 switches. There are two styles included here: - Haute42 MX LP keycap - Haute42 MX LP keycap 2 The ‘Haute42 MX LP keycap 2’ version…
these mod parts are made to go with the v1.1 version of the OB10 TiPX magazine that is made by:ODDBALL PAINTBALL https://www.printables.com/model/213848-tipx-magazine-ob-10%2Fcomments the idea of this modded parts is to make it compatible…
I needed a lightweight stand for my ASUS MB169B+ monitor that required less space than the case stand requires. I did find some other stands that were at a fixed angle but every so often I need a different angle. I also wanted to have…
Model felgi dla Arocs Double E do opon z serii Wpl RC. Druk najlepiej z niepełnymi podporami, aby było łatwiej usunąć. Opony najlepiej wypełnić pianką i wkleić, aby nie spadały. Wykorzystuje orginalne maskowanie sruby koła. Wheel rim…
Should be drop-in replacement. Does not have the tow hooks or room for a winch. If you need that, send me a message.
I've been holding off on posting this for months because I keep forgetting to take pictures, but at this point I'm just going to post and hopefully come back later with pictures. These are rack ears for an Allen & Heath AB/DX/DT168…
I really liked both designs I remixed from, but I saw a bit of an idea to try. These WPL and JJRC trucks are pretty darn light weight. Which, in theory, could be bad for traction. And in some models they're a bit top heavy and can easily…
Da das Gehäuse der DELL TB16 Dock sehr gerne zerbricht, habe ich dafür einen Ersatz konstruiert. Diese ist bei uns in der Firma schon an einigen Arbeitsplätzen im Einsatz. Ich habe zwei Versionen: TB16_Connection_Housing (fits smoothly) -…
Slide in stands for the Asus ZenScreen MB16 Monitor. Modeled for and tested on MB16AC but I bet they work for MB16ACR and MB16ACM. There's 2 model on more "upright" and one more "inclined" and for each there're models that take 10mm…
This is Version 1.2.4 of a case system for Kistenberg NORB 16 boxes. (Version 1.0 was not published). Key Features case system for Kistenberg NORB 16 boxes stackable mounting on a wall or stand on your desk or workbench Printing…
Recently I bought some sorting boxes on Amazon from a seller which could be bound together. I found the idea realy nice and you could stack the boxes very easily. Boxes on Amazon I decided to buy them again and this time the same boxes…
This is a screw down cover for an B16 fuse. It is likely other B16 fuses can be used as well because of standardization. It covers the side of the fuse and its terminal. It has extra space to fit a lamp terminal to connect the non fused…
protective cover for the Acer MB16AP portable monitor
congrats my first share is a brick. print using 2 floor 2 roof 2 walls and line/grid infill to make it balloon. no i dont know why i got a wall artifact in the base/backing. but i decided it dont bother me. fits my phone perfectly. and…
Acer MB16AP portable monitor protective cover and multiboard mount
Mount for my BBB16v2 controller onto a flat surface. BBB16 mounting holes are designed for 3MM or #4 machine screw. Holes on bottom plate are spaced at ½ inch.
FPP PB16 mounts for the CG1500. Use #6 ½" sheet metal screws. Attach the brackets with 1/2" screws to the CG1500. Two Screws at the bottom and 1 or 2 at the top. Then attach the BBB16v2 with 3 or 4 1/2" screws.
This knob fits the kitchen robot Tefal QB161H38 https://tvuj3dtisk.cz/kuchynsky-robot
A simple replacement for USB-C plug enclosure for Dell TB16 docking station. I've never seen the original one, when I bought my two stations they were already broken, but after spending few minutes with caliper and Blender, here it is!…
Slide in stands for the Asus ZenScreen MB16 Monitor. Modeled for and tested on MB16AC but I bet they work for MB16ACR and MB16ACM. There's 2 model on more "upright" and one more "inclined" and for each there're models that take 10mm…
I needed more protection cover like the hager - KZ059. So i made one using as model the original KZ059 i had. The result fits perfectly, like the original one. I printed it in PETG as it's quite flexible Edit: Added the neutral protective…
I've been holding off on posting this for months because I keep forgetting to take pictures, but at this point I'm just going to post and hopefully come back later with pictures. These are rack ears for an Allen & Heath AB/DX/DT168…
This knob fits the kitchen robot Tefal QB161H38 https://tvuj3dtisk.cz/kuchynsky-robot
These are switch caps for Cherry MX, mid-height MX style switches and low profile Cherry + Kailh choc v2 switches. There are two styles included here: - Haute42 MX LP keycap - Haute42 MX LP keycap 2 The ‘Haute42 MX LP keycap 2’ version…
Zusammenfassung Dies ist ein hochdetailliertes 3D-Druckmodell des Red Bull RB16B. Im Maßstab 1:10 eignet es sich perfekt als Ausstellungsstück für Formel-1-Fans und Motorsportfans im Allgemeinen. Mit seiner einzigartigen weißen Lackierung…
I got the idea from @arnmac 's monitor stand ( https://www.printables.com/model/151648-asus-mb169b-monitor-stand ). Looking at that model I was struck by the fact that the monitor's center of gravity shifted as the monitor was moved to…
In my office, people like to break things. One of those things is the Dell TB16 Dock plug cover. The model is super simple but it's a snug fit. I sand the corners just to make it less uncomfortable in-hand, and glue the cap together. I…
I needed more protection cover like the hager - KZ059. So i made one using as model the original KZ059 i had. The result fits perfectly, like the original one. I printed it in PETG as it's quite flexible Edit: Added the neutral protective…
After upgrading the ESC in my WPL and JJRC trucks I found that I could no longer easily reach the switch to turn them on or off. The ESC is a fairly common inexpensive brushed with or without brake model. The switch drops right in place…
FPP PB16 mounts for the CG1500. Print 2 and use #6 1/2" and #6 3/4" sheet metal screws. Use the 3/4" screws for the top holes and screw through the Controller and mount, into the case standoffs. Use 1/2" screws for all the other holes.…
The “WB1616 Flat Mount” is for mounting the controller into a CG1500 type box. M3x20mm and M3xx8mm are uses to attach the controller. #4-40x3/4" and #4-40x1/4" can also be used. It can be printed without supports. The “WB1616 Meanwell…
This is a mounting bracket for the FPP PB16 Controller ( https://github.com/computergeek1507/PB_16 ) for the Harbor Freight $9 ammo box enclosure. You may need to make your own standoffs for your specific power supply. The Standoffs I…
Mount a PB16 Receiver Out to the side of a Meanwell Power Supply. Two version, one using 3mm heatsets, or self threading using a #6 machine screw. Requires additional nylon spaces as well.
I printed this upside-down standing up. The same goes for the model. Needs supports, I also used a 2 layer raft. To attach the grill to the cabine part I used a tiny bit of hot glue on the tabs on the inside.
Bumper does not need supports. Frame needs support on the ends only. You can glue the parts together or use small tie wraps, in the frame part there are holes for this and in the bumper part you can use the wire holes. This is shown in…
You can press it in place and hope for the best or add a tiny bit of hot glue. I have printed it without supports using PLA on 0.15mm
Great work by HansHeld on his trailer. I wanted to modify the trailer frame to fit the stock rear end of the wpl b16 truck, as I had one to use. Printed perfectly, frame fits perfectly (tight, but solid) with stock rear axle mounts. Will…
New version https://www.printables.com/model/787091-wpl-b16-electronics-plate --- This goes from the front bumper all the way to the back of the cabin. The large hole is for the cables, the two small holes to attach it to the original…
Set of Legs to hold Asus MB169C+ Monitor. Designed for use with Dell Latitude 5591 Laptop, because the included folding cover/stand is a nice cover, but a terrible stand. One leg has an opening to allow the USB-C cable connection. Holds…
With this plate you can neatly hold all your electronics (maybe, I don't know what you got) and you can mount a power switch. It fits neatly and the cabin can still be screwed to the frame as usual. It sits on top of the old thingy that…
