1 / 2
AnkerMake M5 "Mouth Guard" Ducts [Redux]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The remix to an alternative to the stock cooling ducts
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 163
- Makes
- 2
- Views
- 1,170
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
All credit to @AustinDennis_479320, @Jared_273781, and @BlakeDouglas_545792 who created and tested the original design
The following modifications have been made:
- The screw holes are shrunken down to 2mm diameter because my screw holes are stripped. These are backwards compatible with the original bracket.
- There is a 1mm lip under the duct entryway so facilitate the thin wall that inserts into the OEM fans.
- I made the bottom flat to facilitate printing. There's less chance of lifting and the chamfer has less chances of lifting seams
printing recommendations: 0.20mm layer, +2 layer walls, 0.52mm width. Enable Detect Thin Walls.