Magnetic strip for the curtain
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.20 net (excluding VAT)
For file: pasik 8_0.2mm_PLA_MK3S_14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.18 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 14.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnetic strip for the curtain , 10 different designs
- Rating
- 5 / 5
- Likes
- 103
- Downloads
- 167
- Makes
- 3
- Views
- 931
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Magnetic strip for the curtain, 10 different designs
Make your wife or girlfriend happy and print a pretty strip on the curtain
You need 6x2mm magnets
The magnets go into the band quite hard, the best way to put them on is to put them on the tip of a knife and push them into the hole
Pay attention to the correct polarity!
If the strips are short, you can connect them via magnets, as shown in the picture, the polarity fits so that they connect
The thickness of the strip is 0.4 mm - 2 layers of filament, then it is very flexible