1 / 8
Prusa Mount for Squirrelbrain's Raspberry Pi Cases
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Prusa MK3S mount for the cases made by @Squirrelbrain.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 5
- Views
- 339
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain, listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the existing holes in the case. I added a channel on the back if you are running wires on the back.
Updated: 8-20-2023 v2 tweaked for the rPi-3-B
@Squirrelbrain cases: