magnetic slider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple sign slider with three integrated 3x6mm Magnets.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 2
- Views
- 592
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a simple sign slider with three integrated 3x6mm Magnets. Those Magnets are modelled right into the part, you need to place it in the parts mid-print. It is important to get the magnet orientation correct for it to work.
I printed with .2mm layer-height and grinded it down with 300 grid to improve the sliding characteristics.
in the slicer watch out for the layer you need so put in the magnet.
If you really like this thing I would appreciate a small tip.
Print instructions
Category: Household Supplies Summary
This is a simple sign slider with three integrated 3x6mm Magnets. Those Magnets are modelled right into the part, you need to place it in the parts mid-print. It is important to get the magnet orientation correct for it to work.
I printed with .2mm layer-height and grinded it down with 300 grid to improve the sliding characteristics.
in the slicer watch out for the layer you need so put in the magnet.
If you really like this thing I would appreciate a small tip.
Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2 recommended
Infill: 25%
Filament: generic PLA black for slider, white for base