NFC215 box 25 cards Zelda
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box for 25 cards. I use it to store NFC215 tags, which i have as a 'replacement' for Amiibo's The box is Zelda themed
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 154
- Makes
- 0
- Views
- 1,904
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I had some NFC tags laying around, and i needed a way to store them.
I found this https://www.printables.com/model/258431-rugged-box-parametric/comments which had a parametric file, so i edited it to hold 25 cards.
I added a the Hylian Shield to it, because this holds my ‘amiibo cards’ for Zelda BOTW.
I printed it in PLA, 10% infill.
The seal, if needed, would best be printed in TPU, but i didn't bother.
You will need 6 m3x30 screw to serve as hinges.
As for the pictures;
I printed this with Eryone Gold Silk and GST3D black , both in PLA.
300mm/s, 230°, 0.2layer height, 2 wall, 3 top and 3 bottom layers. On a 0.4 nozzle.
Printed on a PET carbon fiber sheet, hence the motive.
In the files;
box-zelda-hinge2x.stl ; print this twice
box-zelda-seal.stl : print this in TPU, but the part is not required. (maybe helps for some waterproofing, but has no use for me in this project)
box-zelda.3mf 3MF precolored file, make sure to print the seal seperatly and in TPU
box-zelda.stl : main bottom part
box-zelda-lid.stl : main top part, has the hylian shield embedded into it
box-zelda-hylianshield.stl : just an stl of the hylian shield, just in case of