1 / 3
Print-in-Place Rocket Launcher, upgraded firing pin assembly — image 1
1 / 3

Print-in-Place Rocket Launcher, upgraded firing pin assembly

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I LOVE this model, but I had some trouble getting it to fire and reset consistently. Now fires nearly every time.

Rating
4.833 / 5
Likes
55
Downloads
491
Makes
7
Views
2,003
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

So I tried printing Nakozen's rocket launcher(https://www.printables.com/model/432773-rocket-launcher-toy-print-in-place) in PLA+ 3 or 4 times and consistently had an issues with getting the push pin to smash the center firing pin off of the lip. I cut one in half with a knife and figured out that if I added some meat to the central firing pin, increased tolerances, and made the push pin quite a bit more square, it will fire more consistently.

Printed on an Ender Pro S1 with Duramic 3d PLA+. Works really well for my 6 year old son, and resets with ease. 

Remember to block seams from the v cut where the pin locks in!

After testing overnight it is almost 100% reliable to catch and fire.

Tags