1 / 2
Elegoo Neptune 3/4 Pro/Plus/Max Ball Bearing Spool Holder (M6 bolt remix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Neptune 3/4 pro/plus/max ball bearing spool holder, remixed to use 1x M6 bolt and nut instead of 1x M8 bolt
- Rating
- 4.938 / 5
- Likes
- 214
- Downloads
- 1,175
- Makes
- 14
- Views
- 9,451
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Spool Holder for your Elegoo Neptune 3 Pro (Plus, Max, and others) that uses ball bearings for smooth feeding.
Also lowers your machine by 2cm, making it fit into most small tents for 3D printers (e.g. Creality-branded ones).
You can mount two spool holders on each side.
Hardware
- 2x 608ZZ ball bearing (skateboard bearings) per side
- 1x M6x20mm (1mm thread pitch) bolt per side
- 1x M6 nut per side
Print Instructions
0.2mm layer height, 2 walls, 15% gyroid infill.
Assembly
- Make a complete cylinder by joining together two half-cylinders with an hexagonal pin
- Add two 608ZZ ball bearings to each end of the cylinder
- Drop the cylinder in the main body
- Use adhesive to mount M6 nuts into hexagonal recesses of the thread adapters
- Use the M6x20mm bolt to attach the main body to a thread adapter part (after that, you can't take out the cylinder)
- Attach the completed holder to your printer