1 / 4
65mm 2s 300-350mah Battery Holder (aka a battery holder to make a Mobula6) — image 1
1 / 4

65mm 2s 300-350mah Battery Holder (aka a battery holder to make a Mobula6)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Do you want a 2s 65mm "whoop"? I made a 2s 300-350mah battery holder to fit a 65mm frame, you need to cut away the old…

Rating
0 / 5
Likes
5
Downloads
36
Makes
0
Views
450
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Do you want a 2s 65mm "whoop"?

I made a 2s 300-350mah battery holder to fit a 65mm frame, you need to cut away the old 1s holder.

I did not turn the battery on it's side as it just starts to hang too low at that point.

It works with beta65 pro and ur65 frames nicely. (those are the only ones I have to test against.)

Designed to be printed out of TPU.

I printed at 0.15mm, you don't need support for the actual holder as the hanging area is so small but some support from build plate only for the mounting part helps, infill doesn't matter.

To use, cut the 1s built in holder off and pop it onto the two cross bars.

weighs 1.2 grams.

Category: R/C Vehicles

Tags