EOS1-2 camera canopy for whoop style quads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a canopy that holds the Caddx EOS1-2 cameras. (EOS1 needs to be the later model with mounting holes on the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a canopy that holds the Caddx EOS1-2 cameras. (EOS1 needs to be the later model with mounting holes on the side)
It will fit any of the "Whoop" style quads as long as it has the power to lift the camera, it fits the beta75x and beta65x clearing the VTX, thanks to Albert Kim for testing that part for me.
I tried bringing the sides of the canopy a little forward to protect the camera but even moving them forward 1mm made them show up in the video.
If using on a quad with the BetaFPV Z01/Z02 Camera/VTX (65x,75x) then remove the original mount and put a piece of double sided foam tape under the camera end of the VTX for support.
Please consider tipping as I do not own a beta?5X quad and I am just designing them for the community so any help will be great.
Print with support at 0.1mm for best results.
If printing with TPU set the support angle to 40-45 degrees and
Update: Added a thicker version to handle TPU better, it is 2 perimeters around instead of just one, only added 0.7 grams more to the weight.
Category: R/C Vehicles