Ender 3 Mosquito NF Crazy + 5015 Fan Fang Hotend Mount Shroud Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hotend mount for Mosquito Crazy NF with Fang fan shroud mounting on Ender 3 style carriage.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 614
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted a very lightweight hotend mount for this weird mosquito Crazy NF and Dragon fusion hotend that I received, so I redrew and combined two separate models into one, which would fit the hotend and the lightweight but powerful smooth fang with 5015 fan. I added a small hole for wire management if needed, I don't use it on mine.
There are two versions, one with just a direct hole going into the hotend and the other with a spot for an M6 fitting with threads. It screws directly into the mount and will sit flush when screwed in fully.
Requires 2x M3 nuts to capture the screws from the fang. It's still WIP but works very well so far, I might swap the nuts for M3 heat inserts. It uses the original smooth fang model as it's difficult to modify that model.
Assembly starts by screwing the heatsink into the mount. You can then thread the M6 fitting if you're using one, afterwards, you can use the 4 M3 screws to attach the adapter to the gantry, I usually start with the first 2 on the block mount. Lastly, after the extruder and motor are mounted, you can attached the fan with the M3 nuts and screws, making sure to position it where the airflow hits at the tip of the nozzle.
If you want to use this model with something of similar length to the Mosquito, I use a modified KlackEnder for probing the bed. You will need to adjust the height of the Probe Block and Probe Dock by changing the values in the parametric file for the Nozzle Position to about 40mm.
The 40mm fan adapter and BMG adapter for the carriage can be found in my other 3D Models.