TPA3116 Amplifier Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This amplifier case is specifically designed for the SANWU SW-HF183 VL1 (TPA 3116) digital Bluetooth amplifier.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 128
- Makes
- 0
- Views
- 1,150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Standard Digital File License
This amplifier case is specifically designed for the SANWU SW-HF183 VL1 (TPA 3116) digital Bluetooth amplifier. Note that I only left the speaker and power terminals “open”, so you cannot reach the USB port, micro SD card slot or the on-board buttons. For Bluetooth functionality, you only need the aforementioned terminals to be reachable.
For assembly, you'll need four M3 nuts and four M3x25mm bolts (I used socket head with hex insert). The cutouts for the nuts and bolt heads use a single layer (0.2mm) “floor” that you can easily remove after printing. This allows you to print these sections without support material. I would suggest using support material for the slot-shaped opening on the cover.
Support
If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: https://s.click.aliexpress.com/e/_oFT8Gq6
Whenever you buy something through this link, I get a small kickback without costs for you ;)
Thanks for your support!