Side carrying handles for Voron 0.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strong carrying handles to lift and carry the Voron 0.2.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 64
- Makes
- 0
- Views
- 589
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an easy mountable front handle for the top hat of a Voron 0.2
Benefits:
- Strong handles to lift the Voron 0.2
- No modification of the acrylic panels needed
- STL files beeing orientated in print orientation. No rotation, no support needed
I recommend ASA/ABS and a layer height of 0.2mm.
Only parts you need is
- 2pc side carrying handles
Hardware required:
- 4pcs M3 nuts
- 4pcs M3x12mm screws
Instructions:
Put zwo pieces M3 nuts into the upper side profiles of the top hat.
Unfortunatly this is nessesary to lift the weight of the machine, so you will have to deattach the top fron and the front top panel brackets.
Then you can unscrew the top front screw (doesnt have to completely removed) and attach the two M3 nuts on both upper profiles.
Reattach everything.
Attach the side carrying handles with 2pcs M3x12 screws on each side by screwing into the just loaded M3 nuts.
Done! :)