1 / 2
Voron 0.2 Tophat LED Stripe Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part allows it to attach an 12mm wide LED stripe to the new Voron 0.2 Tophat.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 81
- Makes
- 0
- Views
- 807
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
The bracket is angled so that it points centrally to the print bed (when placed at the top).
You need to print two of them, to mount 20 cm of LED stripe to the printer.
The mounts are designed to be mounted in the upper front corner of the new Voron 0.2 Tophat.
You will need some M3 screws and nuts. It may help to use some superglue to connect the LED Stripe, if it gets loose.