1 / 2
iHSV57 Wirebox with optical fiber
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cover box for all the connections of the iHSV 57 interface With optical fiber slots to read LED and PG9 holes
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 51
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I made this little cover box for all of the connections on the interface of the iHSV 57 servo motors from JMC.
Features included:
- Holes for PG9 cable glands
- Slots for optical fiber to read LEDs
- Use the servo screws to hold in place
The tolerances are good, when mounted only liquid can enter the box.
I used cheap audio optical fiber from china, the holes are a little bit smaller so you will need to use the proper drill bit for your fiber! (Mine was 2.25mm diameter)
It prints better with 0.4mm nozzle for embossed texts