MagSafe PopSocket Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
adapter for magsafe chargers that lets you attach a popsocket poptop to it
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 78
- Makes
- 0
- Views
- 1,224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for magsafe chargers that lets you attach a popsocket poptop to it
I use the magnetic popsocket all the time, and got so used to it that it felt weird holding my phone without it when I was using the magsafe charger. Now I won't have that problem anymore!
The center piece that the poptop clips to was measured/modeled based on this: https://www.thingiverse.com/thing:5280449
After making this, I found that the apple charger's magnetic hold was pretty weak, so I'm using the ESR brand charger that has a bit of a stronger hold.
magsafe_popsocketis for the original apple chargermagsafe_esr_popsocketis for the ESR brand charger: link
The same center part works for both.
The settings that worked best for me in prusa slicer are already in the 3mf files.
Printing instructions:
- center
- the smaller the layer height the better. If you have a <0.4 nozzle that'll help with the small details
- build supports on plate only - these will go through the two holes to support the top of the piece, tweezers get them out easily
- ring
- To save time & not use supports, I used variable layer heights for both. The only part that really needs the thin layer is the top so that the fillet can be printed without supports