MagSafe PopSocket Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adapter for magsafe chargers that lets you attach a popsocket poptop to it
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for magsafe chargers that lets you attach a popsocket poptop to it
I use the magnetic popsocket all the time, and got so used to it that it felt weird holding my phone without it when I was using the magsafe charger. Now I won't have that problem anymore!
The center piece that the poptop clips to was measured/modeled based on this: https://www.thingiverse.com/thing:5280449
After making this, I found that the apple charger's magnetic hold was pretty weak, so I'm using the ESR brand charger that has a bit of a stronger hold.
magsafe_popsocketis for the original apple chargermagsafe_esr_popsocketis for the ESR brand charger: link
The same center part works for both.
The settings that worked best for me in prusa slicer are already in the 3mf files.
Printing instructions:
- center
- the smaller the layer height the better. If you have a <0.4 nozzle that'll help with the small details
- build supports on plate only - these will go through the two holes to support the top of the piece, tweezers get them out easily
- ring
- To save time & not use supports, I used variable layer heights for both. The only part that really needs the thin layer is the top so that the fillet can be printed without supports