1 / 2
Electric wire insulator for fencepost
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Electric wire insulator for fencepost
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 206
- Makes
- 0
- Views
- 940
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is built from scratch in fusion 360 but inspired from the model linked in the remix so it looks similar. The reason for remixing was to add a angled fixing hole top increase stability when mounted and to dimension this for wire which is typical size for where I live.
This insulator nails or screws into the top of a fence post and keeps a “hot” top wire from touching any of the fence posts and creating an electrical short. Designed for 3mm diameter wire but will work for anything of less diameter also.
| Print Settings | Setting |
| Walls | 2+ |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | Asa - anything else also works but it wont last as long outside |
| Infill | 15% |
| Supports | None |
| Other | If you have lots of tension on the wires increase the # of walls |