1 / 5
Yaesu FTM-500 car mount (using lighter socket)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed an easy and non-invasive (no holes, no glue) way to mount FTM-500 Radio front panel in my car...
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 75
- Makes
- 0
- Views
- 1,811
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
No supports, no glue:
You need just:
- 1x M3x15-20 bolt with hex head
- 1x M3 hex nut
- 1x M5x20 bolt (with a knob to your liking)
Everything can be printed without supports. I recommend at least 25% infill and a filament that will stand higher temperatures and UV light. I used ASA.
There's a place for M3 nut in the thinner "leg”. Remember to set printing pause in your slicer to put the nut in the place.
Shorten or lengthen the “leg” to change the viewing angle of the radio panel.