Remixed 0.05mm Resolution Dial Calipers -
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.66 – €0.80 net (excluding VAT)
For file: Caliper-cap_0.2mm_PLA_MINI_56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.73 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 55.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
gcode for doing a true multi-colour print of the Numbers & Markings on the caliper's body.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 57
- Makes
- 1
- Views
- 993
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This only contains the gcode for doing a true multi-colour print on a Prusa Mini+
"0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers.
Start with the filament for the main body colour loaded.
Then after about 10 minutes of printing, it will unload the filament and prompt you for loading the filament you'll be using for the text.
After about 3 minutes of printing the numbers and the markers, it will unload the filament and ask you to reload the filament for the main body colour again.
The remaining print time is now about 76 minutes.