MacBook charger protection
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: test_0.15mm_PLA_MINI_9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cover that protects MacBook chargers from bending
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 129
- Makes
- 4
- Views
- 1,336
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🇬🇧 – English –
This protection is for MagSafe MacBooks for (mostly) European charger types.
Unfortunately, my chargers from Apple bend very easily and a while ago it got to a critical point when I unpacked my stuff on a business trip and the charger was completely bent. I had to create a protection for the charger.
The ‘cap’ has two versions - with and without a MagSafe holder.
Since the charger can differ in size by a few decimals of millimetres, I recommend doing a test print first (test.stl) to check how firm it holds or if it's not too loose. If it's too loose, adjust the Scale factors from 100% to 99.9% and try again.
I tested the version without it on a MacBook USB-C charger (Intel versions) and it's a bit loose, so I would recommend printing it with approx 99.9% scale.
🇨🇿 – Czech –
Vymodelovala jsem ochranu pro MagSafe MacBooky pro ceske zasuvky.
Bohuzel se mi casto stava, ze se mi nabijecka na MacBook ohne a pred nedavnem uz to dosahlo vrcholu, kdy jsem na byznys ceste vybalila veci a nalezla nabijecku v batohu uplne ohnutou, takze jsem si musela vyrobit vicko.
Vicko ma dve verze - s MagSafe drzackem a bez neho.
Protoze se nabijecky mohou o par desetin milimetru lisit, doporucuju nejdriv udelat testovaci tisk (test.stl), aby se zjistilo, jak dobre na nabijecce bude drzet. Pokud by to bylo az moc volne, v PrusaSliceru bych zkusila zmenit Slice faktors z 100% na 99.9% a udelala dalsi testovaci tisk.
Viko jsem otestovala i na MacBook USB-C nabijecce (ty s Intelem) a byla trosku volna, takze tam bych rovnou sla minimalne do 99.9% pomeru vuci puvodni velikosti.