SV06+ Plus 5015 Fan w/ mounting Tabs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix Of SV06+ Vortex Fan. This remix allows the mount to be mounted with M3 x 25 tapered screws instead of the gluing.
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 593
- Makes
- 4
- Views
- 2,841
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Sv06+ Plus Vortex fan with mounting bracket.
Printed with PETG 0.2mm line height, supports as needed.
Hardware: M3 x 25 tapered for mounting to gantry. used tapered head for this so the hardware doesn't interfere with X-axis calibration. x2
M3 x 25 screws with M3 nut and locking washers for the mounting the pieces together and fan. Recommend putting the nuts on the left side so it doesn't hit during calibration. x3
While mounting make sure to adjust the ducts so they are higher than the tip of the nozzle so that the ducts dont hit the printed parts.