Lamp mount for Malm headboard and Tertial desk lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts a Tertial and anything else with the same fitting to a Malm headboard.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 0
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Share Alike
Mounts a Tertial and anything else with the same fitting to a Malm headboard.
Requires 5 m5x10mm BHCS screws.
UPDATED: Clamp is 2mm wider to allow room for some rubber pads made from bicycle innertube. It's highly recommended to use some rubber pads or similar to stop the mount sliding.
Print with 4 perimeters in the orientation supplied. Can creep in PLA, probably better in PETG or ABS/ASA if you have an enclosure. I've printed the updated version is in ABS-CF.
I used a 0.4mm nozzle, 4 perimeters, 5 top and bottom layers and 20% grid infill at 0.6mm width. Should be ok with a 0.6 nozzle, but let me know if the threads don't work.