Lofi Radio: Pi4 + BrainCraft HAT case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printable case for the Raspberry Pi 4 with Adafruit's BrainCraft HAT, designed to complement the Learn system…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 0
- Views
- 1,348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
A 3D printable case for the Raspberry Pi 4 with Adafruit's BrainCraft HAT, designed to complement the Learn system project lofi hip hop raspberry pi radio.
This is a remix of Guysoft's Raspberrypi 4 / 4B+ case on Thingiverse, which in turn remixed other designs.
Print instructions
I printed using the 0.20mm Speed settings on an mk3s.
To add color to the inset letters, put a filament change after the 2nd layer of the model and a second filament change 2 layers after the lettering fills in.
Use 4 2.5mm×3.4 mm Installed Length heat set threaded inserts in the base. Secure the BrainCraft HAT with 16mm stand-offs (or 12mm stand-offs plus 2×2mm nuts) on the side opposite the 40-pin connector.
You'll need to flex the wall of the top out a bit to pass it over the part of the jack that protrudes beyond the PCB edge.