1 / 3
MCRN logo fridge magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An MCRN logo magnet.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 93
- Makes
- 4
- Views
- 441
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
I scaled up the original about 50% and added holes for three 8x3mm magnets. Print the base in black and change to white filament at Layer 34. I recommend enabling ironing for all top surfaces. The red dot needs a dab of glue to hold in place, but the magnets are press fitted. I flipped mine upside down when gluing so the rough surface from the textured plate showed.