Case With Battery Door For GM328 Component Tester
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of https://www.thingiverse.com/thing:2775688 I wanted to be able to access the battery with one screw.…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 60
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a remix of https://www.thingiverse.com/thing:2775688
I wanted to be able to access the battery with one screw. I also wanted the device to be at an angle but not too steep so the test components don't fall out while working with it. I'm very happy with the results, and I hope others find it useful too.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
Yes
Filament:
Monoprice PLA
Notes:
I recommend printing the battery door rotated so that it's standing tallest on the flat flap. This way the stress points of the corners of the battery clasp don't break easily.
I used #4 x 3/8" (3mm x 10mm) size sheet metal screws to fasten the PCB and #4 x 3/8" (3mm x 10mm) wood screw for the battery door.
I put small rubber feet on the bottom to keep it from sliding around.
Category: Electronics