1 / 5
Quick Ratcheting Bar Clamp Replacement Finger / Gripper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick Ratcheting Bar Clamp Replacement Finger / Gripper
- Rating
- 4.333 / 5
- Likes
- 20
- Downloads
- 103
- Makes
- 2
- Views
- 567
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is built from scratch in fusion 360 based on a broken gripper / finger for my 150mm (8") quick ratcheting bar clamp. Print with the pad to the build plate as that gave it optimal strength for my application.
| Print Settings | Setting |
| Walls | 5 |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | PLA+ |
| Infill | 50% |
| Supports | None |
| Other | You should probably use something other than PLA but I tried it to failure and the clamp couldn't put enough pressure to break the PLA+. |