Picoprobe (debug probe) - RP2040-Zero case v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for RP2040-Zero board running Picoprobe firmware
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 298
- Makes
- 5
- Views
- 2,225
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A dedicated case for the smallest usable RP2040 board I could find. It has labels for pins used by Picoprobe and a separate hole for each cable to prevent tangling. It screws together with (up to) 4 M3 14mm screws (and nuts).
The project was designed for Bambu AMS multi-color print but the labels should stay legible if they are not filled with color (recessed only).
It prints nicely with a textured plate and supports on both sides.
In this version, I added mini-clips holding the cables in place to help with putting the thing together.
Related links
https://github.com/raspberrypi/picoprobe
https://www.waveshare.com/wiki/RP2040-Zero
https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf
Wiring
You can follow the official “Getting started…” guide linked above. The needed GP2, GP3, GP4, GP5 are marked as 2,3,4,5 on the RP2040-Zero board.
