Elfa Utility Board Mount for Google Home Mini
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.44 – €1.76 net (excluding VAT)
For file: google-home-mini-vertical-mount_015mm_petg_mk3s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.60 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.98 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount your Google Home Mini vertically on an Elfa Utility Board so your friends from the FBI can hear you better.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 56
- Makes
- 1
- Views
- 602
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I whipped up this mount to hold a Google Home Mini vertically on an Elfa Utility Board. It's similar to other designs I observed with the exception of the specific hangars needed for the Elfa product.
The model I used to create this was a Google Home Mini v1 that I found on another site. However, I'm using it with my Mini v2 just fine.
I found it made it easier to pass the plug end through the hole, then plug in the Mini, and then set it in its mount.
Print instructions
Print on its side with all supports as I believe this yields the ideal orientation of the layers. Yes, they make things a little ugly, but you hardly see any of this bracket once the Mini is loaded.
Print files sliced for PETG.