1 / 4
Ultrasonics mount (HC-SR04 to SG-90) — image 1
1 / 4

Ultrasonics mount (HC-SR04 to SG-90)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple 90* degree mount desined to fix the HC-SR04 Ultrasonics sensor to the 90* degree Servo SG-90.

Rating
5 / 5
Likes
15
Downloads
388
Makes
1
Views
1,088
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is a printable design to mount the HC-SR04 ultrasonics sensor to the Micro SG-90

To make this design work you'll need four small screws (or two - for each opposing corner) to mount the ultrasonics sensor to the print. And you'll need the 90* degree half mount plastic tab that comes with the SG-90.

The pentagonal hole between the two ultrasonics Holes is designed so the user can clearly see the four markings on the sensor (VCC, GND, TRIG, ECHO), meaning the pins must be on the top side of the mount.

Print in:

  • 0.2mm layer height
  • 10-15% infill

 

Tags