Parkside MIG welder spool bushing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement part in case of the original bushing wore down, broke, or went missing. Might work for other machines too.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 593
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement bushing for the parkside mig welders. Measurements taken from the original part.
I have printed it succesfully with PLA, PETG, and Nylon. Should be printable with any material really. Just keep in mind it can get quite hot in that little thing so I recommend atleast PETG to be safe.
There are 2 STLs, the normal one with accurate measurements and also a slightly thicker one to hopefully make it stronger if the need arrises.
if you like my work, consider donating :)
https://ko-fi.com/jobis