RMU-Mk3 Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets to mount RMU-Mk3 to Prusa MK3 frame within Original Prusa Enclosure.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 62
- Makes
- 1
- Views
- 1,589
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Upper and Lower brackets to attach a RMU-Mk3 to Prusa MK3, so that together they can be installed and removed from an Original Prusa Enclosure as one assembly for a neater installation.
RMU-Mk3 https://filamentbuffer.co.uk/
Mount Lower Bracket to frame using M3 3030 Nuts and 2 off M3x15 screws. Attach the Upper and Lower Brackets to RMU-Mk3 body using 4 off M3x20 screws and nuts.
Brackets were printed using 0.2mm_PETG. 20% infill.
Upper bracket slots on to the printer frame support just through friction alone but it can be made more secure by replacing the existing M4x10 frame support screw with a M4x20 and securing the bracket down on to the back of the frame with a M4 nut if required.
The frame support is required when the PSU is relocated to back of the enclosure.