Tweezers for magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One simple | One overengineered | Fits 5mm magnets
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 0
- Views
- 423
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Recently I struggled to insert 5mm magnets into my print.
It is doable, but so much hassle, especially if it flips and u lose which side was the right one, especially when you have connecting parts.
I designed print-in-place tweezers, where you can glue one magnet to the top side, and the bottom will always be reserved for another magnet that has the same polarity!
Tip: You can print 2, and add + and - on top in case you need both polarities!
(If requested or if it becomes popular I can expand the type of magnets it holds)
To print this, make sure to have support enabled, the rotating part should come loose with a light squeeze if it's not already loose.
You will need 1 pen spring.
- Simple version, I recommend to print with 1.5mm wall
- Simple version, print with brim