Voron Tap R8 Switchwire
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modified mount for Tap on the Switchwire.
- Rating
- 5 / 5
- Likes
- 62
- Downloads
- 264
- Makes
- 1
- Views
- 2,763
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Modified mount of VORONTAP R8
28/09/2023-I apologize, the belt lock has an offset of 0.595 in the -Y direction which causes the belt to misalign with the pulleys which could lead to a deterioration of the same cause rubbing on the edge. I corrected the pieces and labeled with "FIXED"
I have not printed jet and Voron team said switchwire bed are NOT rigid enough. Use at your own risk.
V1 are flat on connection point, V2 has a little step.
Belt connector is secured to main body with two heat-insert and two M3x12. This design should let belts untouched in case of disassemble.
Follow the Voron Tap instructions for installation: https://github.com/VoronDesign/Voron-Tap
Part should be printed as show in picture . No supports needed.