Voron Tap R8 Switchwire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified mount for Tap on the Switchwire.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 264
- Wydruki
- 1
- Wyświetlenia
- 2763
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Modified mount of VORONTAP R8
28/09/2023-I apologize, the belt lock has an offset of 0.595 in the -Y direction which causes the belt to misalign with the pulleys which could lead to a deterioration of the same cause rubbing on the edge. I corrected the pieces and labeled with "FIXED"
I have not printed jet and Voron team said switchwire bed are NOT rigid enough. Use at your own risk.
V1 are flat on connection point, V2 has a little step.
Belt connector is secured to main body with two heat-insert and two M3x12. This design should let belts untouched in case of disassemble.
Follow the Voron Tap instructions for installation: https://github.com/VoronDesign/Voron-Tap
Part should be printed as show in picture . No supports needed.