1 / 3
Salt / Sugar Dispenser Lid — image 1
1 / 3

Salt / Sugar Dispenser Lid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lid to store and pour salt/sugar

Rating
0 / 5
Likes
8
Downloads
38
Makes
0
Views
344
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

My second take on the lid contest.

I quite love this one, simplistic yet very effective.

Version A:
has a slot on the lid to cover the gap

Version B:
Has the notch covering the gap

My Print (pictures) does have a few spaces, but that is due to high humidity. I hope to get my hands on a filament dehydration machine.

For best results, this has to be printed,

  • upside down.
  • supports enabled with interface layer (I used 60%).
  • support Z distance, this will vary on ur printer, I use 0.2 for easy support removal and for a good finish.
  • X/Y distance 0.8mm (or even higher) to be able to remove the support easier. This could potentially be printed with bridging, but in my opinion, the sliding part would weld to the previous layer.
  • I printed with 0.2mm layer height. If you choose a different height, after slicing, make sure there is a free layer between the notch and the lid.

 

Tags