Bambu Lab P1P toolhead cover hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A semi-permanent toolhead cover hook to aid in the maintenance of your P1P or X1C*
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 232
- Makes
- 6
- Views
- 3,103
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Previously, when I've have to remove the toolhead cover to perform hotend maintenance, I've had to unplug the part cooling fan and set the cover aside. But I don't think unplugging and plugging in the small connector and stretching the thin wires is good for them, so I created this semi-permanently attached hook which keeps the cover out of the way by hooking over the top carbon rail.
* Initially, I just made this to suit my P1P, which has a blank slot with holes on the back of the toolhead cover. But on the X1C this slot has a circuit board screwed onto it (for the light-up Bambu Lab text?). I've modified the mount so it should clear the circuit board on the X1C cover. Please let me know if you have an X1C and it doesn't work and feel free to remix as required.
If you have a P1P, the 2 tiny screws needed for the mounting holes are in the spares bag named “For Extruder”. For an X1, you'll have to remove the 2 screws, mount the hook and re-use the screws to secure it. They should be sufficiently long to do this.
**** CAUTION!! ****
The dovetailed hook part (A) MUST be removed from the fixed part (B) when using the printer, otherwise the hook will hit the very front of the machine during calibration.
Always keen to hear feedback if it works for you, or if it needs tweaking at all :)
I printed this in PETG but it should be fine to print in PLA, PLA(+)
Designed in Tinkercad