1 / 3
Prusa MK3S+ Z-Axis Bearing (fixed calibration)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix fixes the calibration of the z-axis when bearings are used to prevent the rod from moving too much.
- Rating
- 4.5 / 5
- Likes
- 33
- Downloads
- 173
- Makes
- 2
- Views
- 990
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 608 bearing can now be completely countersunk to be as close as possible to the prusa original holder.
I have used small o-rings to make the bearing protrude a little further and to protect against dust.
I have encountered that if an o-ring thicker than 1.5mm is used, the calibration does not work.
The 1.5mm thick o-ring that I used is attached.
This model has fixed the calibration of the Z-axis for me and certainly for you :)