Hairy Heads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cool heads with changeable hair and print in place flexi arms and legs.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 16
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Heads with easily changeable hair. That are cute, adorable and fit perfectly in your hand!
Once the hair is finished just cut free of support with a knife or some pliers. Then just use a hair dryer on full heat to shape and reshape. You can even shape the brim of the cap!
Print with normal settings but you may want to increase the flow rate if possible for the hair. For the hair make sure the layer height is 0.2 and for the cap you can use prusa's organic support for the brim to give it that nice textured design, or you could just use the print gcode provided. All of the head is print in place and the joints just need a little pressure to snap loose
The legs and arms are designed to be print and place and provide enough friction to hold up the head so it can stand up!
Enjoy!