3 hook paint booth gantry
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This gantry allows me to apply fill and clear coat on lures that I am working on.
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 159
- Makes
- 0
- Views
- 1,174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This gantry allows me to apply fill and clear coat on lures that I am working on. If you need to do bulk type operations on parts that can hang, while spinning on a turn table or such, this might be helpful for you too.
Print instructions
Print the two large frames (they are identical.)
The cross bar with the J hooks on it could use a 3mm brim. As loaded, the model will print, but the cross bar tends to warp due to it's round profile on the main bar. I got a full print of all three parts out of it and bent the bar back while it was still warm. Advise to print the cross bar separate, or add a brim and print all three.
Comes out fine in 3mm draft - it's not art work after all.
Once printed, use a file and coax the rounded ends on the cross bar into the rounded holes. For smaller or rounder-hooks, I used a file to streamline the J hooks before final assembly.