1 / 6
Dremel 220 upgrades
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrades for the Dremel 220 drill press.
- Rating
- 4.5 / 5
- Likes
- 109
- Downloads
- 447
- Makes
- 5
- Views
- 2,705
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
There are 4 different upgrades/mods.
TPU feet
- prevents the sharp edges of the bottom of the drill press from scratching your work table
- reduces vibrations
- requires four 4x7x6mm heat-set inserts and four M3x8 bolts
Mounts
- allows the user to easily mount objects onto the metal base
- requires four M4x16 bolts
Heat-set brass insert press / soldering iron holder (added 2023-06-17)
- easily insert heat-set brass inserts into your 3D prints
- can be printed with PLA, even though it has a low melting temperature. You may want a more heat resistant material if you are going to use it for long periods of time
Small enclosure (added 2023-06-17)
- prevents tiny bits from flying everywhere while drilling, while still allowing the handle to be pulled all the way down