1 / 4
pc4-m8 x 1,25 pneumatic ptfe conenctor for prusa MINI — image 1
1 / 4

pc4-m8 x 1,25 pneumatic ptfe conenctor for prusa MINI

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Prusa screwed up bad with their PTFE conectors - they are unobtanium, along with brass olives that you CAN'T even…

Rating
5 / 5
Likes
62
Downloads
368
Makes
6
Views
2,318
Reviews
7

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Prusa screwed up bad with their PTFE conectors - they are unobtanium, along with brass olives that you CAN'T even order from them.

So I modified greatest thing ever made by Ondřej Kotas on thingiverse (https://www.thingiverse.com/krtektm/designs) to fit 8x1.25mm threat. Now you can use any PTFE tube freely without problems!

Recommended to print it in 0.15mm layer, 3 or 4 perimeters and 100% infill.

Use strongest material you have, Im using PETG right now, PLA will still work as stopgap without much issues.

edit:

Added hotend version winch is higher by a few mm to allow tightening. Alternative is printing out different fan spacer (attached .stl too) winch would allow you to use normal body part.

Print instructions

Recommended to print it in 0.15mm layer, 3 or 4 perimeters and 100% infill.

Use strongest material you have, Im using PETG right now, PLA will still work as stopgap without much issues.

Tags