Parkside PWM A1 Anemometer tripod adapter and holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The anemometer has no surface to stand on, so I designed a holder to put it in. it can also be mounted on a tripod.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 624
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The anemometer has no surface to stand on, so I designed a holder to put it in. it can also be mounted on a tripod, if you get one of those adapter screws( amazon link ) and put it in from the inside. I used a heatgun to soften the plastic before screwing it in.
To fix the bar you'll need two countersunk m3x10mm screws.
The fit was a bit on the thight side, maybe do a partial test print and see if you have to adapt horizontal expansion or flow values.
If you want to support my work, consider leaving a tip or a friendly comment here on Printables. :)
Category: Tool Holders & Boxes