Voron Molex Micro-Fit Flat-4 Passthrough for ERCF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hex pop-in to the Voron skirt for a Molex receptable
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 77
- Makes
- 0
- Views
- 614
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The Enraged Rabbit Carrot Feeder (ERCF) is a multi-material unit that can be used with Voron or other printers with Klipper. This device is controlled via a controller board which offers a CANBUS control option using 4 wires from the CAN controller in the Voron Electronics Bay to the ERCF.
I wanted an easy way to add a Molex Micro-Fit 4-wire connector to the skirt, and decided upon a hexagonal pop-in support that would fit in the existing skirt holes.
Print face down, does not require supports. I used PLA, will work for ABS as well. I've included one with ERCF text on the insert, a blank one, and the Fusion file if you want to customize it for your own use. Enjoy!