Voron Molex Micro-Fit Flat-4 Passthrough for ERCF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hex pop-in to the Voron skirt for a Molex receptable
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 614
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The Enraged Rabbit Carrot Feeder (ERCF) is a multi-material unit that can be used with Voron or other printers with Klipper. This device is controlled via a controller board which offers a CANBUS control option using 4 wires from the CAN controller in the Voron Electronics Bay to the ERCF.
I wanted an easy way to add a Molex Micro-Fit 4-wire connector to the skirt, and decided upon a hexagonal pop-in support that would fit in the existing skirt holes.
Print face down, does not require supports. I used PLA, will work for ABS as well. I've included one with ERCF text on the insert, a blank one, and the Fusion file if you want to customize it for your own use. Enjoy!